BEOWELD / Help & contact
A little help.
A clearer answer.
Find answers about Liquid PTFE, or send the BEOWELD team a product question.
Before your next fix
Good questions.
Clear answers.
Choose the right bottle, understand the joint and know what to check before putting it back into service.
Should I choose 10ml or 50ml?
Both contain BEOWELD Liquid PTFE. Our compact 10ml bottle seals up to 40 threads, based on ½″ BSP metal threads. Coverage varies with joint size and application. The 50ml bottle holds five times as much sealant for repeated use.
Can I use it wherever I see a thread?
No. Use it only on suitable metal-to-metal joints that seal between the threads. Compression nuts, push-fit connections and joints that seal with washers or gaskets work differently. Do not use BEOWELD Liquid PTFE on plastic threads. Use the fitting check above before choosing.
Where is Liquid PTFE most useful?
It is particularly useful on suitable metal threaded joints in tight or awkward spaces — for example under sinks, behind toilets or near walls — where wrapping tape neatly is difficult. Check the exact connection: those locations can also contain compression or push-fit fittings, which this product is not for.
What temperature should I apply it at?
For best performance, apply at an ambient temperature between 5°C and 50°C. This is the application temperature range; it does not describe the cured joint’s operating temperature limits.
How long should I leave it to cure?
Follow the cure times and service conditions on your bottle’s instructions. Assembling the joint is not the same as completing the cure. Allow the specified cure time before putting the joint into service; do not assume it can take full pressure immediately.
Can the joint be dismantled later?
Yes. Our directions specify standard hand tools for disassembly. Heat may be needed to loosen a fully cured joint. Isolate and depressurise the system first, and check the product safety information and fitting manufacturer’s restrictions before applying heat. If you are unsure, ask a qualified installer.
What if the joint still leaks?
Stop and safely isolate the system before investigating. Recheck the sealing surface, fitting condition, preparation and cure instructions. More sealant will not repair a damaged fitting or correct the wrong type of joint. Ask a qualified installer if the cause is unclear.
Where do I buy, and what about delivery?
Choose the 10ml or 50ml Amazon button above. Amazon shows the current price, availability, delivery options and applicable returns information before purchase. Checkout takes place on Amazon.
Ask BEOWELD
A question before
your next fix?
Ask about our products or tell us which fitting you’re considering them for.
For urgent leaks or advice on working safely on a system, contact a qualified installer.