The short answer
Clean the thread surfaces, apply a thin continuous bead to the male thread, assemble the fitting and allow it to cure before pressurising. Follow the product label for cure times and confirm the fitting is suitable before you begin.
Before you open the bottle
BEOWELD Liquid PTFE is an anaerobic thread sealant intended for suitable metal-to-metal threaded joints. It cures between closely fitting metal threads. It is not for plastic threads, compression fittings or push-fit connectors.
If you are uncertain where the connection seals, start with our fitting guide. Read the label and safety information before use. Work only on a system that has been safely isolated and depressurised; ask a qualified installer if you cannot do this safely.
1. Prepare the threads
Remove old sealant, dust, oil and debris. Make sure the mating thread surfaces are clean and dry. Check the fitting condition and follow its manufacturer’s preparation instructions.
The BEOWELD directions specify application at an ambient temperature between 5°C and 50°C for best performance. This is an application-temperature range, not a statement about the joint’s operating-temperature rating.
2. Apply a continuous bead
Apply a thin, continuous bead to the male thread, keeping the leading thread clear. Use the nozzle to control placement. The aim is a controlled application around the thread, rather than a large quantity squeezed onto one spot.
Do not use the product as an external patch over a leaking assembled connection. Confirm the cause of the leak and suitability before making a repair.
3. Assemble the fitting
Bring the mating parts together and tighten as required by the fitting manufacturer. Wipe away excess sealant. Do not substitute a generic tightening instruction for the fitting manufacturer’s guidance.
4. Allow time to cure
Allow the sealant to cure before pressurising or putting the system into service. Follow the cure-time guidance on the product packaging. Assembly is not the same as a fully cured joint.
If you need help interpreting the product instructions, use the private enquiry form and tell us the fitting materials and intended application.
Keep the checks with your toolkit
Our printable five-point checklist brings the key preparation and suitability checks together. Both the 10ml and 50ml bottles contain the same BEOWELD Liquid PTFE; choose a size for your expected use rather than a different application method.
Based on BEOWELD’s Directions of Use and product Q&A. The current product label and fitting manufacturer’s instructions take precedence.
Find the right size for your toolkit.
Explore BEOWELD Liquid PTFE in 10ml and 50ml, with purchase links to Amazon.
Compare bottle sizes