The short answer
BEOWELD Liquid PTFE is for suitable metal-to-metal joints that seal at the threads. A visible thread does not automatically make a fitting suitable: compression, push-fit and washer-sealed connections work differently.
Start with the sealing surface
Before choosing a sealant, ask two questions: what are the mating parts made from, and where does the connection actually seal? The thread may form the sealing joint, or it may simply pull two other sealing surfaces together.
Check the fitting manufacturer’s instructions. If the sealing arrangement is unclear, ask a qualified installer before taking the fitting apart or applying a product.
Four connections that look similar
| Connection | What to look for | BEOWELD Liquid PTFE? |
|---|---|---|
| Metal threaded joint | The mating metal threads form the sealing joint. | May be suitable; check the fitting and product instructions. |
| Compression fitting | A nut compresses an olive around the pipe. | No. Do not apply it to the compression joint. |
| Push-fit connection | An internal O-ring seals around the inserted pipe. | No. |
| Washer or gasket connection | The thread tightens a separate sealing component. | Do not treat the nut thread as the sealing surface. |
BEOWELD Liquid PTFE is not suitable for plastic threads, even if they screw into a metal fitting.
A tight space does not change suitability
A precision nozzle can help with access when applying sealant to a suitable male metal thread. This can be useful where wrapping tape neatly is awkward. Access is only one part of the decision: first confirm the connection seals at the threads.
A fitting under a sink or behind a toilet may use an olive, washer or push-fit connection. Location alone cannot tell you which sealant to use.
Check the application before starting
Confirm that the product is suitable for the materials and service conditions. This guide does not establish approval for gas or drinking-water applications. Consult the current product instructions and the requirements for the specific installation.
Use our fitting checker as a starting point. Once suitability is confirmed, read how to apply BEOWELD Liquid PTFE.
Based on BEOWELD’s product Q&A and fitting guidance. Always check the instructions supplied with your fitting and sealant.
Find the right size for your toolkit.
Explore BEOWELD Liquid PTFE in 10ml and 50ml, with purchase links to Amazon.
Compare bottle sizes